Applications
The standard configuration is suitable for most applications. Protection alongside roads, cycle paths and sites with limited width. Typical applications include crossings of high-voltage lines with municipal roads, access roads to industrial sites and narrower waterways.
.C-Fe9DoD_Z1ajmyU.webp)
.iiKjJBXl_Z2nCJwe.webp)
.CqPLkcpS_ZQrnvu.webp)
.C9kp7ckW_1zhpjF.webp)
.Bhc0T0l0_1LQXIC.webp)
Basic configuration
The basic configuration consists of two uprights and one crossbeam. The uprights are each placed on a set of concrete blocks (SYSTEM ETD), the number of which is determined by the stability study. The crossbeam connects the two uprights at the required height and is secured with the steel clamps (SYSTEM ETD). The standard configuration bridges a maximum width of 10 metres, measured between the outer faces of the uprights. The crossbeam height is a maximum of 9.5 metres, measured from ground level to the underside of the crossbeam.
Extension
Extensions build on the standard configuration by adding extension elements. Each extension element consists of one additional upright and one additional crossbeam. By combining multiple elements, the total span can be gradually increased to more than 100 metres.
Specifications
Want to know more about the standard configuration or request a quote?
Get in touch